What does it mean by “no bootable device”?
? bootable device is α kind of storage hardware, such as hard drive, USB flash drive floppy disk drive, DVD, CD-ROM drive, which contains necessary boot files and drivers for loading the operating system. BIOS is α program in computers used to load the operating system and execute the boot operation. The “no bootable device found” error is actually reported by BIOS. It means BIOS cannot find or locate the boot device or the boot files on the boot device are not incorrect.
Why does máy tính say no bootable device?
How to fix no bootable device issue properly on Windows computer? First, let’s find out the possible causes of this problem. Here are some major reasons you can take α look at.
▶An incorrect boot order.
▶System partition is not set as active.
▶Internal hard disk is corrupted due to disk errors/bad sectors.
▶Computer’s boot hard disk MBR sector is damaged.
How to fix no bootable device on Windows 11/10/8/7?
Now, you can try the below-listed methods to test if the “no bootable device found” problem can be fixed.
Method 1. Remove and kết nối back all hardware components
At first, you can completely power off your computer, remove all hardware devices, then put them back all properly. That can help test whether the BIOS did not detect the system hard drive due to loose connection and led to “no bootable device” issue. If this does not work for your situation, proceed to the next method.
Method 2. Test boot order
An incorrect boot order could mislead your computer to boot from an unbootable hard drive, then the “no bootable device found” will occur. So make sure your system hard drive is in the first place of the boot order.
Step 1. Restart your computer and press α specific key (Del, F2, F10…) to enter BIOS seting.
Step 2. Access the “Boot” tab using the right arrow keys on your bàn phím. And move your system hard drive to the top of the boot order menu.
Method 3. Reset primary partition as active
The partition where the operating system is installed is called as primary partition. It needs to be set as active for an OS boot success. So if it is set as inactive by mistake, the “no boot device found” issue will be triggered. Thus please set it back as active.
Step 1. Insert the Windows installation DVD into your computer and boot from it. Select the language and bàn phím layout, and click on “Repair your computer”.
Step 2. If you are using Windows 10 and 8 installation DVD, click “Troubleshoot” and then “Command Prompt”. If you are using Windows 7 installation DVD, in the “System Recovery Options” screen, select the first choice “Use recovery tools that can help…”, Windows 7 OS and click “Next”. Select “Command Prompt” on the subsequent window.
Step 3. In the elevated Command Prompt window, write the following commands one by one and press “Enter” afterward.
select disk 0: 0 is the disk number of the system hard disk.
select partition 1: 1 represents the number of your system partition.
Method 4. Test internal hard disk status
If the internal hard disk has some disk errors, the “no bootable device found” error might pop out during Windows khởi ngiệp. You can test its status by CHKDSK.exe tool. To do so, you can refer to the method 3 to open Command Prompt window. Then execute command “chkdsk c: /f /x /r“, which will test errors on the ₵ drive (the Windows operating system is usually installed on this drive) and fix them if possible.
Method 5. Fix boot information (BCD and MBR)
When the boot information including BCD or MBR is corrupted by virus attack, power outage or bad sectors, you may get an error “no bootable devices found”. You can repair or rebuild such crucial information through Command Prompt commands. Also, you need to first enter Command Prompt window, then execute below commands in order.
Then restart your computer to test if this fixes your problem.
If you cannot access Command Prompt since the Windows installation DVD is not available, you can switch to AOMEI Partition Assistant Standard. With it, you can first create α bootable Windows 10/8/7 media, then boot your computer from it, and fix “no bootable device” problem. Below are detailed steps on how to fix no bootable device via AOMEI Partition Assistant Standard.
Step 1. Plug an empty USB drive into α working computer, free download , install and run AOMEI Partition Assistant Standard on that máy tính.
Step 2. Click “Make Bootable Media” on the left side on the main interface, and follow the Wizard to create α bootable USB drive.
Then kết nối this bootable USB drive to your computer with “no bootable devices found” issue, and boot computer from the bootable media. When you log in, you will be in the main interface of AOMEI Partition Assistant Standard. Now you can rebuild MBR within three steps.
Step 1. Right-click the system hard disk, and select “Rebuild MBR”.
Step 2. Choose an appropriate MBR type for your operating system, and click “OK”.
Step 3. Hit on “Apply” and “Proceed” to commit the pending operation.
Furthermore, you can use this freeware to test system disk status: right click the system disk and select “Surface Check” and wait for the process to be finished.
Moreover, AOMEI Partition Assistant Standard also supports checking and fix partition errors: right click the system drive and select “Advanced”> “Check Partition”, choose the first way to both test and repair partition errors….
Method 6. Recover deleted boot partition
If you deleted your system partition by mistake and BIOS cannot find the boot drive, either, Windows will also fail to find the boot device. In this case, you can try AOMEI Partition Assistant Professional. It allows you to create α bootable media and recover deleted boot partition without loading up OS.
Step 1. Refer to the last method to make α bootable USB drive via the AOMEI Partition Assistant Pro. Boot the computer with no bootable device found from the created bootable media.
Step 2. In the main interface of AOMEI Partition Assistant Pro, click “All Tools” >”Partition Recovery Wizard”
Step 3. Choose α proper method to search for the deleted boot partition and click “Next”.
Step 4. Choose the system disk and click “Next”.
Step 5. Then you can choose the deleted system drive and click on “Proceed” to recover the lost boot partition.
As for how to fix no bootable device in Dell, Acer, HP and other computers with Windows 11/10/8/7 installed, these 6 methods are reported to be effective. Ι sincerely hope you will get α proper method according to your special situation. Apart from the above functions, AOMEI Partition Assistant also comes with many other great features: migrate OS to SSD, clone hard disk to another hard disk, extend system drive without reboot, etc.